2015 John Deere 3038E

With three-plus decades of experience in this industry, we take pride in being the exclusive company in the United States (to our knowledge) that elevates used equipment to number one condition, backed by our optional warranty. We allocate our time and resources to ensure the delivery of a high-quality product, aiming to prevent any unnecessary inconvenience on your part. Additionally, we dedicate ourselves to assisting customers in finding the ideal equipment for their specific needs. Purchase with confidence, knowing that our commitment ensures top-notch quality and customer satisfaction. Start your journey with Arizona Tractor Sales.

John Deere 3038

4 Wheel drive
New tires
Just had Dealer inspection with a clean bill of health
Hydrostat Transmission
New seat
Great mechanical condition
Box blade available at additional cost.

Key Specs
Engine power (gross) SAE J1995 rated power: 27.4 kW
38 hp

Power take-off (PTO) power 22.4 kW
30 hp
Steering hydraulics 15.0 L/min
4.0 gpm
Implement hydraulics 20.2 L/min
5.3 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 615 kg
1356 lb
Standard transmission; forward/reverse Hydrostatic transmission (HST)
Cruise control Optional
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1210 kg
2668 lb
Cab: Not applicable
Wheelbase 1593 mm
62.7 in.
Engine
Family FYDXL1.57TDA
EYDXL1.57TDA
GYDXL1.57TDA
Manufacturer Yanmar
Engine model 3TNV86CT-NJT2
Engine power (gross) SAE J1995 rated power: 27.4 kW
38 hp
37.2 PS at 2500 rpm
Power take-off (PTO) power 22.4 kW
30 hp
Rated engine speed 2500 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.57 L
3 / 95.7 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86 x 90 m
3.4 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water Pump
Air cleaner Dual element
Engine torque at rated speed 104.7 Nm
77.2 lb-ft
Fuel tank capacity 28.5 L
7.5 gal. Type High pressure common rail direct injection
Fuel system
Standard transmission; forward/reverse Hydrostatic transmission (HST)
Left-hand reverser No
Final drive Spur gear
Brakes Wet disk
Steering Power steering
Axle capacity Front
880 kg
1940 lb
Rear
1200 kg
2645 lb
Creeper No
Cruise control Optional
Differential lock Yes
Transmission
Type Open center
Pump rated output Steering
15.0 L/min
4.0 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump type Dual gear
Maximum operating pressure 172 bar
2495 psi
Draft control sensing Position control
Remote control valves available Up to two (optional)
Hydraulics
Type Category 1
Lift capacity, 24-in. behind link arms 615 kg
1356 lb
3-point hitch
Standard Rear - 540 rpm
Control Independent
Clutch Wet disk
Brake (for mid and rear PTO) Wet disk
Power take-off (PTO)
Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system 20.8 L
22 qt
Fluid capacities
Type Spur gear
Differential lock Yes
Final drive
Rollover protective structure Type
Foldable
Platform - flat/straddle Straddle
Gear shift location - console/floor Left-hand side
Operator station
Dimensions
Wheelbase 1593 mm
62.7 in.
Front axle clearance Minimum: 299 mm
11.8 in.
Maximum: 333 mm
13.1 in.
Turning radius without brakes 2.9 m
9.4 ft
Approximate shipping weight (open-station; cab) OOS: 1210 kg
2668 lb
Cab: Not applicable